VOM VOS-6100 CRT Readout Analog Oscilloscope

VOM VOS-6100 CRT Readout Analog Oscilloscope

Features
· 100MHz Bandwidth, Dual Channel, Delayed Sweep
· Built-In 6 Digit Universal Counter
· 10 Sets Memory for Front Panel Setting Save Recall
· Time Base Auto-Range
· Cursor Readout with 7 Measurement
· Panel Setup Lock of Digital-Control Functions
· Buzzer Alarm
· LED Indicator
· TV Synchonization
· Trigger Signal Output
· Z-Axis Modulation Input
· SMD Technology, High Stability and Reliability
http://www.arijaya.com/image/cache/d...pe-500x500.jpg
Specification
Cursor Measurement
· Cursor Measurement Function :  T, 1/  T,  V; P ( t, v)
· Cursor Readout Function
· Cursor Resolution : 1 / 25 DIV
· Effective Cursor Range Vertical : V/ DIV, AC/ DC/ GND, CH1, CH2, INV, ALT, CHOP, ADD; Horizontal : TIME? DIV, x1/ x10) , X-Y

Horizontal System
· Horizontal Modes : MAN ( A) , ALT, DELAY ( B)
· A ( main) Sweep Time : 50nS ~ 0.5S/ DIV, continuously variable ( UNCAL)
· B ( delay) Sweep Time : 50nS ~ 50mS/ DIV
· Accuracy : ± 3 % ( ± 5 % at x 10MAG)
· Sweep Magnification : x10 ( maximum sweep time 5nS/ DIV)
· Hold OFF Time : Variable
· Delay Time : 1µ S ~ 5S
· Delay Jitter : 1/ 20000 or less
· Alternate Separation : Variable

X-Y Mode
· Sensitivity : X-axis, Y-axis selectable
· X-Axis : CH1, CH2 ’ 2mV ~ 5V/ DIV ± 3%
· Y-Axis : CH1, CH2 ’ 2mV ~ 5V/ DIV ± 3%
· EXT ’ 0.1V/ DIV ± 5%
· X-Axis Bandwidth : DC ~ 500KHz ( -3dB)
· Phase Error : 3° or less at DC ~ 50KHz

Cursor Readout Function
· Cursor Resolution : 1/ 100DIV
· Effective Cursor Range : Vertical : ± 3DIV, Horizontal : ± 4DIV
· Cursor Measurement Function :  V,  V% ,  VdB,  T, 1 /  T,  T% , 
· Panel Setting :
o Vertical : V/ DIV ( CH1, CH2) , UNCAL, ADD, INV, P10, AC/ DC/ GND
o Horizontal : S/ DIV ( MTB, DTB) , UNCALx 10, Delay time Hold-off
o Trigger : Source, Coupling, Slope, Level, TV-H
o Others : X-Y, LOCK, SAVE / RECALL, MEM 0-9

CRT
· Type : 6-inch rectangular type with internal graticule 0% , 10% , 90% and 100% markers. 8x10DIV ( 1 DIV = 1 cm)
· Phosphor : P31
· Accelating Potensial : 16KV approx
· Illumination : Continuous adjustable

Vertical Deflection System
· Sensitivity : 2mV ~ 5V/ DIV, 11 step in 1-2-5 sequence
· Sensitivity Accuracy : 3% ( 5DIV : at the center display)
· Vernier Vertical Sensitivity : Continuosly variable to 1 / 2.5 or less than panel-indicated value
· Frequency Bandwidth ( -3dB) : DC ~ 100MHz ( 2mV/ DIV : DC ~ 20MHz)
· Rise Time : 3.5ns ( 2mV/ DIV : 17.5ns)
· Signal Delay : Leading edge can be monitored
· Maximum Input Voltage : 400V ( DC + AC) at 1KHz or less
· Input Impedance : 1M& ± 2% / / 25pF approx
· Vertical Modes : CH1, CH2, DUAL ( CHOP / ALT) , ADD ( DIFF mode can be established when the CH2 is in the INV mode)
· CHOP Repetition Frequency : Approx. 250KHz
· Polarity ( INV) : CH2 only
· Bandwidth Limited : 20MHz
· Common-mode Rejection Ration : 50: 1 or better at 50KHz

Trigger System
· Trigger Modes : AUTO, NORM, TV
· Trigger Source : CH1, CH2, LINE, EXT
· Trigger Couplig : AC, DC, HFR, LFR
· Trigger Slope : + / - polarity or TV sync polarity
· Trigger Sensitivity :
o AUTO : 10Hz ~ 20MHz, 0.35DIV, 50mVpp ( 20MHz ~ 100MHz) 1.5DIV, 150mVpp
o NORM : DC ~ 20MHz, 0.35DIV, 50mVpp ( 20MHz ~ 100MHz) 1.5DIV, 150mVpp
o TV : Sync signal, 1DIV, 200mVpp
o Trigger Level Range :
§ INT : ± 4DIV or more
§ EXT : ± 0.4DIV or more
§ TV Sync : TV-V, TV-H
§ Max. External Inout Voltage : 400V ( DC + AC peak) at 1KHz
§ External Input Impedance : 1M& ± 5% // 25pF approx

Z-Axis Input
· External intensity modulation
· Coupling : DC
· Voltage : 5V or more
· Maximum Input Voltage : 30V ( DC + AC peak) at 1KHz or less
· Bandwidth : DC ~ 5MHz

Trigger Signal Output
· Voltage : 25mV/ DIV approx. in 50& termination
· Frequency Response : DC ~ 10MHz
· Output Impedance : 50& approx

Calibration Output
· Waveform : 1KHz ± 5% , square wave
· Voltage : 2Vpp ± 2%
· Impedance : 2k& approx

Special Function
· TIME / DIV Auto Range ( MOS-6103 / 6061 / 6060) : Provided
· Panel Setting Save Recall ( MOS-6103 / 6061 / 6060) : 10 set
· Panel Setups Lock : Provided

Telepon : +62 813-3117-0440 (Pukul 09:00-17:00 WIB Senin-Jumat / Pukul 09:00 - 14:00 WIB Sabtu)

Raja Survey Group
Phone : +62 813 3117 70440
Fax : +62 21 730-3447
BB : 25A9CB48
WhatApp : +62 813-3117-0440
Mail : firdi@rajasurvey.net
Yahoo Messenger : rajasurvey30
Website : http://www.arijaya.com atau http://www.asiaindustri.indonetwork.co.id

Jalan Pesantren No. 64 Jurang Mangu Timur
Pondok Aren Tangerang Selatan
Banten Indonesia 15222

Ini merupakan alamat kantor operasional kami.
Kami tidak memiliki toko offline ataupun kantor cabang.