Kondisi Barang : Baru
Harga :
Lokasi Seller : DKI Jakarta
Description :
Misi gan,
Numpang jual Mobo Gigabyte GA-M68M-S2P
Alasan jual karena sudah upgrade :D
Spek :
Sumber : http://www.gigabyte.com/products/pro...px?pid=3270#sp
[/quote][quote]
Harga :
Lokasi Seller : DKI Jakarta
Description :
Misi gan,
Numpang jual Mobo Gigabyte GA-M68M-S2P
Alasan jual karena sudah upgrade :D
Spek :
Sumber : http://www.gigabyte.com/products/pro...px?pid=3270#sp
[/quote][quote]
CPU
1. Support for AM3/AM2+/AM2 processors: AMD Phenom� II processor/ AMD Phenom� processor/AMD Athlon� II processor/ AMD Athlon� processor/AMD Sempron� processor
* If you install AMD AM3/ AM2+ CPU on AM2 motherboard, the system bus speed will downgrade from HT3.0 (5200MT/s) to HT1.0 (2000 MT/s) spec; however, the frequency of AM3/ AM2+ CPU will not be impacted. Please refer "CPU Support List" for more information.
Hyper Transport Bus
1. 2000 MT/s
Chipset
1. NVIDIA� GeForce 7025/nForce 630a chipset
Memory
1. 2 x 1.8V DDR2 DIMM sockets supporting up to 8GB of system memory (Note 1)
2. Dual channel memory architecture.
3. Support for DDR2 1066/800/667/533 MHz memory modules
* DDR2 1066 is supported with combination of AM3/ AM2+ processors and qualified memory modules, please refer "Memory Support List" for detail memory support information.
Audio
1. Realtek ALC888B codec
2. High Definition Audio
3. 2/4/5.1/7.1-channel (Note 2)
4. Support for S/PDIF In/Out
5. Support for CD In
LAN
1. Onboard Realtek RTL8211CL (10/100/1000Mbit)
Expansion Slots
1. 1 x PCI Express x16 slot, running at x16
2. 1 x PCI Express x1 slot
3. 2 x PCI slots
Storage Interface NVIDIA� GeForce 7025/nForce 630a chipset
1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
2. 4x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices
3. Support for RAID 0, RAID 1, RAID 5, RAID 10 and JBOD
iTE IT8718 chip:
1. 1 x floppy disk drive connector supporting up to 1
2. floppy disk drive
USB Integrated in the NVIDIA� GeForce 7025/nForce 630a chipset
1. Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers)
Internal I/O Connectors
1. 1 24-pin ATX power connector
2. 1 4-pin ATX 12V power connector
3. 1 floppy connector
4. 1 IDE connectors
5. 4 SATA 3Gb/s connectors
6. 1 CPU fan connector
7. 1 system fan connector
8. 1 front panel connector
9. 1 front panel audio connector
10. 1 x surround/center audio header
11. 1 CD In connector
12. 1 SPDIF In/Out connector
13. 2 USB 2.0/1.1 connectors for additional 4 USB 2.0/1.1 ports by cables
14. 1 Chassis Intrusion connector
15. 1 Power LED connector
Back Panel Connectors
1. 1 PS/2 keyboard port
2. 1 PS/2 mouse port
3. 1 parallel port
4. 1 x serial port
5. 1 x D-Sub port
6. 4 USB 2.0/1.1 ports
7. 1 RJ-45 port
8. 3 audio jacks (Line In / Line Out / MIC In)
I/O Controller
1. iTE IT8718 chip
H/W Monitoring
1. System voltage detection
2. CPU / System temperature detection
3. CPU / System fan speed detection
4. CPU / System warning temperature
5. CPU / System fan failure warning
6. CPU fan speed control (Note 3)
BIOS
1. 2 x 8 Mbit flash
2. Use of licensed AWARD BIOS
3. Support for DualBIOSTM
4. PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b
[/spoiler]
1. Support for AM3/AM2+/AM2 processors: AMD Phenom� II processor/ AMD Phenom� processor/AMD Athlon� II processor/ AMD Athlon� processor/AMD Sempron� processor
* If you install AMD AM3/ AM2+ CPU on AM2 motherboard, the system bus speed will downgrade from HT3.0 (5200MT/s) to HT1.0 (2000 MT/s) spec; however, the frequency of AM3/ AM2+ CPU will not be impacted. Please refer "CPU Support List" for more information.
Hyper Transport Bus
1. 2000 MT/s
Chipset
1. NVIDIA� GeForce 7025/nForce 630a chipset
Memory
1. 2 x 1.8V DDR2 DIMM sockets supporting up to 8GB of system memory (Note 1)
2. Dual channel memory architecture.
3. Support for DDR2 1066/800/667/533 MHz memory modules
* DDR2 1066 is supported with combination of AM3/ AM2+ processors and qualified memory modules, please refer "Memory Support List" for detail memory support information.
Audio
1. Realtek ALC888B codec
2. High Definition Audio
3. 2/4/5.1/7.1-channel (Note 2)
4. Support for S/PDIF In/Out
5. Support for CD In
LAN
1. Onboard Realtek RTL8211CL (10/100/1000Mbit)
Expansion Slots
1. 1 x PCI Express x16 slot, running at x16
2. 1 x PCI Express x1 slot
3. 2 x PCI slots
Storage Interface NVIDIA� GeForce 7025/nForce 630a chipset
1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
2. 4x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices
3. Support for RAID 0, RAID 1, RAID 5, RAID 10 and JBOD
iTE IT8718 chip:
1. 1 x floppy disk drive connector supporting up to 1
2. floppy disk drive
USB Integrated in the NVIDIA� GeForce 7025/nForce 630a chipset
1. Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers)
Internal I/O Connectors
1. 1 24-pin ATX power connector
2. 1 4-pin ATX 12V power connector
3. 1 floppy connector
4. 1 IDE connectors
5. 4 SATA 3Gb/s connectors
6. 1 CPU fan connector
7. 1 system fan connector
8. 1 front panel connector
9. 1 front panel audio connector
10. 1 x surround/center audio header
11. 1 CD In connector
12. 1 SPDIF In/Out connector
13. 2 USB 2.0/1.1 connectors for additional 4 USB 2.0/1.1 ports by cables
14. 1 Chassis Intrusion connector
15. 1 Power LED connector
Back Panel Connectors
1. 1 PS/2 keyboard port
2. 1 PS/2 mouse port
3. 1 parallel port
4. 1 x serial port
5. 1 x D-Sub port
6. 4 USB 2.0/1.1 ports
7. 1 RJ-45 port
8. 3 audio jacks (Line In / Line Out / MIC In)
I/O Controller
1. iTE IT8718 chip
H/W Monitoring
1. System voltage detection
2. CPU / System temperature detection
3. CPU / System fan speed detection
4. CPU / System warning temperature
5. CPU / System fan failure warning
6. CPU fan speed control (Note 3)
BIOS
1. 2 x 8 Mbit flash
2. Use of licensed AWARD BIOS
3. Support for DualBIOSTM
4. PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b
[/spoiler]
Spoiler for open this: