TEKNO RC slash 4wd slash 2wd options
 

Kondisi Barang : Baru

Harga :



Lokasi Seller : Jawa Barat


Description :



back in stock



[size=12pt]Tekno RC M6 Driveshafts and Steering Blocks will give your Slash 4x4 the ultimate in performance and durability.

[/size]



# Custom 6mm stub axles - no more bending or breaking

# Bigger outer bearing for better load handling 6x12x4 (stock is 5x11x4 outer)

# Hardened steel driveshafts and drive cups

# Captured CV drive pin - it can't fall out.

# New M6 steering block design with additional bump-steer adjustments

# Eliminates slop

# Stock wheels and nuts fit with no mods

# Metric hardware throughout







http://img34.imageshack.us/img34/1320/teknofront.png



http://img845.imageshack.us/img845/7...eshaftsfro.jpg











[size=12pt]Tekno RC M6 Driveshafts and Rear Hubs will give your Slash 4x4 the ultimate in performance and durability.[/size]



# Custom 6mm stub axles - no more bending or breaking

# Bigger bearings for better load handling 10x15x4 inner and a 6x12x4 outer bearing (stock is 5x11x4 inner/outer)

# Hardened steel driveshafts and drive cups

# Captured CV drive pin - it can't fall out.

# New M6 rear hub design with multiple camber link locations

# Includes two sets of rear hubs (0.5 and 1.5 degrees). 1, 2, 3, and 4 degree settings available.

# Reduces slop

# Stock wheels and nuts fit with no mods

# Metric hardware throughout



http://img171.imageshack.us/img171/1...knorear4x4.png



http://img713.imageshack.us/img713/7...6driveshaf.jpg





aluminum upgraded set of 12mm hex adapters for the Tekno RC M6 6mm Driveshaft kits. They fit all 12mm hex SC wheels. They have a 6mm inner bore to fit the M6 Stub Axles and may be used on other 6mm axle applications where applicable.



* Hard anodized CNC machined aluminum construction

* Set screw to avoid losing drive pins

* Ultimate durability

* Lightweight design

* Compatible with our M6 Driveshafts for the Slash 2WD



http://img62.imageshack.us/img62/242...daptors6mm.jpg





[size=12pt]Tekno RC M6 Driveshafts and Rear Hubs will give your Slash 2WD (or Nitro Rustler/Stampede) the ultimate in performance and durability.[/size]

* Custom 6mm stub axles - no more bending or breaking

* No Telescoping = NO BINDING

* Bigger bearings for better load handling 10x15x4 inner and a 6x12x4 outer bearing (stock is 5x11x4 inner/outer)

* Hardened steel driveshafts and drive cups

* Captured CV drive pin - it can't fall out.

* New M6 rear hub design with multiple camber link locations

* Includes two sets of rear hubs (0.5 and 1.5 degrees). 1, 2, 3, and 4 degree settings available.

* Reduces slop

* Stock wheels and nuts fit with no mods

* Metric hardware throughout

http://img692.imageshack.us/img692/8...noslash2wd.png



http://img31.imageshack.us/img31/467...52m6drives.jpg













open links:



http://www.teknorc.com/index.php?cPa...9199d88236e56f