Baru
MORADON Ventilation Duct
Moradon Ventilation Duct adalah pabrik yg bergerak di bidang ventilasi udara.
semua barang buatan INDONESIA.
kami spesialis untuk Spiral Ducting atau bisa juga disebut dengan ducting bulat. kami menyediakan berbagai jenis Spiral ducting, dimulai dari semi rigid aluminum ducting, flexible aluminum ducting dan yg trakhir spiral ducting. produk akan lebih dijelaskan dalam detail di bawah. kami sangat berminat untuk mencari distributor. tapi kami jg akan melayani jasa pemesanan untuk kebutuhan pribadi (untuk dapur atau pabrik).
Jika berminat anda Bisa menghubungi kami di email
[email protected]
[/spoiler]
Spoiler for open this:
for
SEMI-Rigid Aluminum Ducting (A series):
SEMI-Rigid Aluminum Ducting (A series)
The product is constructed of a special fabrication produces a continuous lock seam that permits the duct to be pulled open, compressed, bent and re-bent without developing leakage.
Advantage
� Do not delaminate or dry rot when heat aged
� Easy installation due to Light Weight
� Can be bent into any configuration
� Can be compressed to nearly 3.5 times its original length for convenient shipping and handling
� Will not sag between 1.8M supports
� Has near zero permeability and leakage; reduces energy loss
� Multiple use products
Moradon Semi-rigid aluminium duct can be used in a number of applications including:
Exhaust ventilation, Heating, Air Conditioning, Fresh air intake
Spoiler for open this:
for
Flexible Aluminum Ducting (FS and FD series):
Flexible Aluminum Ducting (FS and FD series)
The product is constructed of a heavy duty aluminium foil laminate, encapsulating a high density, corrosion resistant wire helix, forming an air tight, easy to use, quality air duct. In addition due to its flexible nature, the need for elbows is eliminated, allowing for ease of installation difficult to reach area. It cuts easily with knife and snips.
we have two types of flexible aluminum there is single layered and double layered flexible ducting.
Advantage
� Easy installation due to Light Weight
� Can be bent into any configuration
� Can be compressed to for convenient shipping and handling
� Multiple use products
Moradon Semi-rigid aluminium duct can be used in a number of applications including:
Exhaust ventilation, Heating, Air Conditioning
[spoiler=open this] for
Spiral Duct (S, E and J series):
Spiral Duct (S, E and J series)
This Product is formed from a coil of metal into a rigid steel tube with 4-ply spiral lockseam. It has a smooth interior for low friction loss with the grooved seam entirely on the outside. This pipe has a resistance to crushing approximately 2 � times of that longitudinal lockseam or welded pipe. Optional corrugations are available which increase the rigidity of the pipe by approximately 300%. Pipe selection can be joined together by a complete seal spiral pipe connector, or e-z flange.
Advantage
� High performance duct
� Easy installation due to rigid features
� Artistic design
� High Strength to weight ratio
� Long lasting
� No major maintenance required
Moradon spiral duct can be used in a number of applications including:
Ventilation, Heating, Air Conditioning, Air Circulation
Jika berminat anda Bisa menghubungi kami di email
[email protected]
TERIMA KASIH GAN ATAS SEMUA PERHATIAN YG TELAH DIBERIKAN !