3rd February 2015
|
 |
Member
|
|
Join Date: Jan 2015
Location: Tangerang
Posts: 50
Rep Power: 0
|
|
Protek 6510 Dual Channel Analog Oscilloscope
Kondisi: Baru Harga (Rp): 10500000 Lokasi: DKI Jakarta
Protek 6510 100MHz Dual Channel Analog Oscilloscope
Features
· Four traces may be simultaneously displayed in ALT-sweep
· Five vertical display modes: CH1, CH2, Dual, Add, Subtract
· Vertical mode triggering for displaying 2 unrelated signals
· Trigger hold-off circuit for synchronizing complex waveforms
· Sweep speeds to 2nS/ Div
· 12kV acceleration voltage for bright displays of low duty cycle signals
· Z axis input
· TV Synchronization for either line or field patterns
· 20MHz bandwidth limit switch for triggering signals in a noisy environment
Product Information
100 MHz 2Ch. Dual Time Base with Alt Mag.
Specifications
Vertical Amplifier (CH 1 and CH 2)
· Sensitivity : 5 mV/Div to 5 V/ Div in 7 calibrated steps, (X5 Mag 1mV/ Div to 1 V/ Div)
· Accuracy : ± 3% (± 5% in X5 Mag)
· Bandwidth (-3dB) : DC to 100MHz
· Rise Time : £ 3.5 ns, X5 Mag: 20MHz Bandwidth: £ 17 ns
· Input Impedance : 1MW + 25 pF
· Input Coupling : AC-Gnd-DC
· Invert Channel : CH2
· Display Modes : CH1, CH2, Add, Subtract, Dual (Alt/Chop)
· Maximum Input Voltage : 400V (DC or AC peak)
· CH1 Signal Output : 20mV into 50W
Horizontal Sweep
· Timebase A - Sweep Time : 50ns/Div to 0.2 s/Div in 21 calibrated steps (1-2-5)
· Timebase A - X10 Mag : 5ns/Div to 20ms/ Div
· Timebase A - Accuracy : ± 3% (± 5% in X10 Mag)
· Timebase A - Hold Off : Continuously adjustable to > 2X sweep time
· Timebase B - Sweep Time : 50ns/Div to 10µ s/ Div in 8 steps (1-2-5)
· Timebase B – Accuracy : ± 3%
· Timebase B - Delay Time : Continuously variable from 0.2µ s to 2s
· Timebase B - Delay Modes : Continuous or triggered
· Timebase B - Sweep Displays : A, B, A alt B, B triggered, X-Y
X-Y Mode
· CH1-X axis, CH2-Y axis Sensitivity : Same as CH1 vertical amplifier
· Bandwidth (X-axis) : DC to 2MHz
· Phase Error : £ 3° DC to 10kHz
Triggering
· Trigger Modes : Auto, Normal, TV-V, TV-L
· Source : Int. CH2, line ext.
· Coupling : AC
· Slope : Positive or negative
· Trigger Sensitivity :
o Int (DC to 10MHz) : 0.5 Div
o Int (10MHz to 100MHz) : 1.5 Div
o Ext (DC to 10MHz) : 200mV
o Ext (10MHz to 100MHz) : 500mV
o TV (Int) : 1 Div Min
o TV (Ext) : 1V P-P
· External Trigger Input : Impedance: 1MW + 20 pF
· Maximum Input Volts : 400V DC or AC peak
Z Axis Modulation
· Sensitivity : ± 5V P-P Intensity increases with a negative going voltage input
· Bandwidth (-3dB) : DC to 2MHz
· Input Impedance : Approx. 2 KW
Calibrator Signal
· Voltage : 0.5V ± 3% P-P 1kHz Square Wave
· Duty Cycle : Approx. 50%
CRT
· Type : 6" rectangular CRT with internal graticule. (1 Div = 1cm)
· Acceleration Voltage : 12 kV
General Specification
· Power Requirements : AC Input Voltage: 100V, 120V, 220V, 240V selectable
· Frequency : 50/60Hz
· Power Consumption : 55W
· Operating Temperature : 0 to 40° C at 35% to 85% relative humidity
· Dimensions : 5.25" H × 12.67" W × 14.5" D
· Weight : 24 lbs.
· Supplied Accessories : Manual, 1 AC Power cord, (2) X10 Probes.
Telepon : +62 813-3117-0440 (Pukul 09:00-17:00 WIB Senin-Jumat / Pukul 09:00 - 14:00 WIB Sabtu)
Raja Survey Group
Phone : +62 813 3117 70440
Fax : +62 21 730-3447
BB : 25A9CB48
WhatApp : +62 813-3117-0440
Mail : [email protected]
Yahoo Messenger : rajasurvey30
Website : http://www.arijaya.com atau http://www.asiaindustri.indonetwork.co.id
Jalan Pesantren No. 64 Jurang Mangu Timur
Pondok Aren Tangerang Selatan
Banten Indonesia 15222
Ini merupakan alamat kantor operasional kami.
Kami tidak memiliki toko offline ataupun kantor cabang.
|