Kesenian gergaji kayu nan indah (scroll saw)

[golputaja]

ijin share gan

kebetulan ane di daulat di kampung ane (ane kebetulan kelompok karang taruna kampung ane gan ) galakkan usaha kerajinan kayu scroll saw.



ini beberapa gambar kesenian kayu nan indah yang ane jadikan bahan presentasi di kampung ane hasil googling gan


[/spoiler]

Spoiler for open this:

Spoiler for open this:

for kerajinan:






































kerajinan kayu handmade di atas bisa direalisasikan dengan alat ini gan

Spoiler for open this:

Spoiler for open this:

for tersangka utama:














karena tersangka di atas berharga mayan mahal klo udah rakitan pabrik alias build up, logikanya masyarakat yang blom pernah tahu hasil keuntungan dari produk kerajinan kayu scroll saw bila di pasarkan, maka di berikan opsi membuat sendiri mesin scroll saw alias hand made lagi / DIY (Do It Your Self)

Spoiler for open this:

Spoiler for open this:

for handmade:
















kelebihan mesin scroll saw handmade adalah segi ekonomisnya, misal harga mesin scroll saw buildup hampir 2jt an (yang bisa di pasang mata plain end) dan berukuran 22in besarnya, handmade harga ga lebih dari 1jt cost nya. dengan kegunaan hampir menyamai.



untuk mesin scroll saw build up, di bedakan dari sbb :

- kemampuan menghandel besarnya media kayu potong (16in , 20in , 22in, dll)

- kemampuan untuk menghandel jenis ujung mata gergaji (plain end & pin end)

Spoiler for open this:

Spoiler for open this:

for sket:














Mata gergaji scroll saw (Scroll Saw Balde)

jenis ujung mata gergaji di bedakan sbb :

- Plain End (membutuhkan scroll saw yang model jepit)

- Pin End (membutuhkan scroll saw yang model kait, di pasaran lebih banyak model ini)

Spoiler for open this:

Spoiler for open this:

for end:














jenis mata gergaji sbb:

Spoiler for open this:

Spoiler for open this:

for mata gergaji:












tiap" jenis mata memiliki fungsi" berbeda-beda sbb:


[/quote][quote]





1. Standard Tooth Blades



The teeth are all the same size and distance apart on standard tooth blades. There are two major kinds: wood blades and metal blades. The wood blades have larger teeth and more space between the teeth. They are designed to clear the sawdust as you cut. The metal blades have much smaller teeth and less space between teeth. I find these a bit noisy.



2. Skip-tooth Blades



These blades are similar to the standard tooth blades, but every other tooth is missing. The space (gullet) between teeth is much wider and keeps the blade cooler. Personally, I like these for most work. They are especially good for beginning scrollers.



3. Double-tooth Blades



This blade is a skip-tooth blade with a large space between sets of two teeth. These blades cut slightly slower but leave a very smooth cut.



4. Reverse Skip-tooth Blades



This blade is exactly like the regular skip- tooth blade, except the last few bottom teeth point upward. This is great for preventing tear- out or splintering on the bottom of the cut and for use with plywood.



When using a reverse skip-tooth blade you must set the blade in the clamps so that only two or three teeth are pointing up above the table top when the saw arm is in its highest position. You may have to trim a little from the bottom of the blade to accomplish this.



5. Precision-ground Blades



These blades are actually a skip-tooth blade with small teeth that have been ground to shape rather than simply filed. These blades are much sharper, cut in a straight line and leave a very smooth surface. Personally, I find they are great blades but very aggressive and unforgiving. I do not recommend them for the beginner.



6. Spiral Blades



These blades are simply a group of blades twisted together so there are teeth all the way around. You can cut in all directions without turning the wood. There are a few applications for this kind of blade, but they leave a very rough, wide surface, cannot make a tight or sharp corner and have a tendency to stretch as you use them. I do not recommend these blades except for special applications.



7. Crown-tooth Blades



This is a totally new design in scroll saw blades. The teeth are shaped like a crown with a space between each crown. The nice part is that the blade can be put in either way, so there is no upside down with these blades. I find they cut a little slower than a regular blade, but they are good for cutting plastic or Plexiglas�.



When the blade dulls you can reverse ends and have a sharp blade again.





saat membeli scroll saw blade akan di hadapkan standar" ukuran sbb :

Wide x Thickness - TPI (Teeth Per Inch) - Long

Lebar x Tebaal - Jumlah gigi tiap inch nya - Panjang



e.g : 0,026in x 0,011in - 28TPI - 5in

artinya : Lebar 0,026 inch x Tebal 0,011 inch - 28 gigi tiap inch - Panjang 5 inch

Spoiler for open this:

Spoiler for open this:

for sket:














moga berguna gan



ini thread ane gan, sapa tau nemu inspirasi

[SHARE] Membuat & mendesign Jam Dinding sendiri

[spoiler=open this] for list:




My Thread

about aquarium

[SHARE] Chiller DIY dengan Peltier buat aquascape

[SHARE] membuat lampu aquarium sendiri murah & ekonomis



about kerajinan

[pic] pemahat kayu bertangan emas (tool : Gergaji mesin)

Kesenian gergaji kayu nan indah (scroll saw)

[SHARE] Hasil jadi kerajinan tangan karang taruna tempat ane gan. mohon support yah

[share] kreatifitas mendulang emas, say no to waktu luang

[SHARE] Membuat & mendesign Jam Dinding sendiri

[share] kreatifitas adalah jawaban untuk permasalahan phk / nganggur



My FJB

JUAL Peltier (elemen panas dingin / thermoelectric)

JUAL Dudukan Bor listrik (Drill Stand) , Gergaji Pigura (miter saw)

Bahan DIY lampu Aquarium (ballast electronic + TL Socket)

JUAL GROSIR MESIN JAM DINDING, untuk bahan pembuatan JAM DINDING

JUAL Mesin jam dinding

JUAL Bahan2 tanaman hias plastik (artificial tree)

JUAL TETRA BITS Complete (pakan ikan / pelet)

Serba Serbi Alat" Pertukangan