STEG K SERIES Competition Amplifier



STEG K.204 (NEW)





Stereo amplifier with integrated microprocessor and stabilized power supply from 11 Volts | Crossovers combined electronic integrated HP / LP / BP / FLAT | Double control technology of frequency filter | Slope 12/24 dB | Q 0.7 / 1 | Compatible with 56 modules AQXM2 frequency (22-8500 Hz) | Input sensitivity 0.2 to 5 Volt | Integrated microprocessor control STEGLINK | Plug PC communication | Software compatible MYSTEG MANAGER | Serial Number | Digital Compatible with the remote control devices STEG | Cooling System Forced INTELLISPEED | suppression circuitry GRIPS | Stabilized power supply from 11 Volt Battery













Specification :

Stereo RMS Power @ 4ohm Watt 335 x 2

Stereo RMS Power @ 2ohm Watt 650 x 2

Stereo Power RMS @ 1ohm Watt 1200 x 2

Bridged Mono Power RMS @ 4 ohms Watt 1300 x 1

Bridged Mono Power RMS @ 2ohm Watt 2400 x 1

SERIALPOWER RMS Power @ 4ohm Watt 4800 x 1

Load impedance min. Stereo / Mono Bridge Ohm 1/2

Damping Factor @ 4ohm > 1000

Range input sensitivity V 0.2 - 5.0

Input impedance Kohm 10th

Filter [quantity] type -[1] HP + [1] LP

Banda intervention of FiltroAQXM2 Hz 22 - 8500

Operating band of FiltroSW4FQ HP / LP Hz 60,80,100,120 / 60,70,80,90

Slope Filter (mono mode) dB / oct. 12 (24)

Frequency Response-3dB Hz 5 - 165000

THD @ 1KHz - 90% rated power. 4ohm % 0.03

DIM distortion - 90% of rated power. 4ohm % 0.005

S / N Ratio - 10Hz 22KHz � - 90% rated power. dB 78th

Signal / noise ratio "A" weighted dB 108

Supply voltage range Volt 10 - 16

Maximum input current @ 4ohm Stereo - 14.4 V A 74.1

Maximum input current Bridged Mono @ 4 ohms A 149.3

Quiescent current - no input signal A 1.82

Low current consumption - amplifier off mA 1000

Range input sensitivity V 0.2 - 5.0

Input impedance Kohm 10th

Filter [quantity] type - [2] HP / LP

Operating band Filter AQXM2 Hz 22 - 8500

Operating band Filter SW4FQ HP / LP Hz 60,80,100,120

Gradient Filter dB / oct. 12th

Frequency Response-3dB Hz 5 - 170000

THD @ 1KHz - 90% rated power. 4ohm % 0.04

DIM distortion - 90% of rated power. 4ohm % 0.003

S / N Ratio - 10Hz 22KHz � - 90% rated power. dB 87th

Signal / noise ratio "A" weighted dB 107

Supply voltage range Volt 10 - 16

Maximum input current @ 4ohm Stereo - 14.4 V A 53.2

Maximum input current Bridged Mono @ 4 ohms A 109

Quiescent current - no input signal A 1.49

Low current consumption - amplifier off mA

Terkait: