| FAQ |
| Calendar |
|
|
#1
24th November 2011
|
||||
|
||||
Smartfreen di Ubuntu 11.04
Kenapa smartfrenku selalu begini, gak bisa connect2 Scanning your serial ports for a modem. ttyS0: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS0: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS0: ATQ0 V1 E1 -- and failed too at 115200, giving up. Modem Port Scan: S1 S2 S3 S4 S5 S6 S7 S8 Modem Port Scan: S9 S10 S11 S12 S13 S14 S15 S16 Modem Port Scan: S17 S18 S19 S20 S21 S22 S23 S24 Modem Port Scan: S25 S26 S27 S28 S29 S30 S31 WvModem: Cannot get information for serial port. ttyUSB0: ATQ0 V1 E1 -- OK ttyUSB0: ATQ0 V1 E1 Z -- OK ttyUSB0: ATQ0 V1 E1 S0=0 -- OK ttyUSB0: ATQ0 V1 E1 S0=0 &C1 -- OK ttyUSB0: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttyUSB0: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttyUSB0: Modem Identifier: ATI -- Manufacturer: +GMI: China TeleCom ttyUSB0: Speed 9600: AT -- OK ttyUSB0: Max speed is 9600; that should be safe. ttyUSB0: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK WvModem: Cannot get information for serial port. ttyUSB1: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyUSB1: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud ttyUSB1: ATQ0 V1 E1 -- and failed too at 115200, giving up. WvModem: Cannot get information for serial port. ttyUSB2: ATQ0 V1 E1 -- OK ttyUSB2: ATQ0 V1 E1 Z -- OK ttyUSB2: ATQ0 V1 E1 S0=0 -- OK ttyUSB2: ATQ0 V1 E1 S0=0 &C1 -- OK ttyUSB2: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttyUSB2: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- AT+ ttyUSB2: Modem Identifier: ATI -- OK ttyUSB2: Speed 9600: AT -- OK ttyUSB2: Max speed is 9600; that should be safe. ttyUSB2: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK Found a modem on /dev/ttyUSB0. Modem configuration written to /etc/wvdial.conf. ttyUSB0: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" ttyUSB2: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2" soleh@soleh-desktop:~$ sudo gedit /etc/wvdial.conf soleh@soleh-desktop:~$ sudo eject /dev/sr1 soleh@soleh-desktop:~$ sudo modprobe usbserial vendor=0x19d2 product=0xffdd soleh@soleh-desktop:~$ sudo wvdial smart --> WvDial: Internet dialer version 1.61 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ AT+GCAP OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Modem initialized. --> Sending: ATDT#777 --> Waiting for carrier. ATDT#777 CONNECT 153600 --> Carrier detected. Starting PPP immediately. --> Starting pppd at Sun Oct 9 13:52:09 2011 --> Pid of pppd: 2192 --> Using interface ppp0 --> pppd: ���[08]@��[08] --> pppd: ���[08]@��[08] --> pppd: ���[08]@��[08] --> pppd: ���[08]@��[08] --> pppd: ���[08]@��[08] --> Disconnecting at Sun Oct 9 13:53:04 2011 --> The PPP daemon has died: A modem hung up the phone (exit code = 16) --> man pppd explains pppd error codes in more detail. --> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information. --> Auto Reconnect will be attempted in 5 seconds --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ~[7f]}#@!}!}!} }3}"}&} } } } }#}%B#}%}'}"}(}"W}0~~[7f]}#@!}!}"} }3}"}&} } } } }#}%B#}%}'}"}(}"o}1~~[7f]}#@!}!}#} }3}"}&} } } } }#}%B#}%}'}"}(}"[08]i~~[7f]}#@!}!}$} }3}"}&} } } } }#}%B#}%}'}"}(}"}?}3~~[7f]}#@!}!}%} }3}"}&} } } } }#}%B#}%}'}"}(}"xk~~[7f]}#@!}!}&} }3}"}&} } } } }#}%B#}%}'}"}(}"@j~~[7f]}#@!}!}'} }3}"}&} } } } }#}%B#}%}'}"}(}"'}2~~[7f]}#@!}!}(} }3}"}&} } } } }#}%B#}%}'}"}(}"[7f]}7~ Terkait:
|
 |
|
|
