JUAL Jual Truggy Team Associate RC8T Team Factory!!!Barang Manteb! Cek Dulu GAnn!!

DiecastPlane

Kondisi Barang : Baru

Harga :

Lokasi Seller : Banten

Description :

Halo Para rc Racer semua mohon izin buka lapak lagi yahhhhh,,,,,Saya baru masukin KIT terkenal untuk buggy offroad 1/8 merk TEAM ASSOCIATE RC8 versi terbaru 2.0 , Spec nya sbg berikut:

RC8T Factory Team Championship Edition Kit Features:

Pre-assembled shocks, diffs and turnbuckles with Factory Team shock and diff fluids included.

Factory Team 16mm "Big Bore" threaded, hard-anodized shocks feature heavy-duty 4mm TiN coated stainless steel shock shafts for durability and reduced stiction.

Updated 5mm 7075 blue aluminum shock towers with additional rear camber link options.

Revised front upper camber link assembly allows for easier adjustments and maintenance.

7075 blue aluminum suspension mounts key into chassis for maximum durability.

Molded bushings allow for easy adjustment of caster, rear toe-in, rear anti-squat, and front kick-up.

Updated steering geometry for more consistency and reduced bump-steer.

Molded composite radio tray includes optional forward placement battery box for increased corner speed.

Molded composite front and rear chassis braces for increased chassis response.

Blue aluminum Narrow hex adapters with pin retainer clips and nylon locking wheel nuts.

JConcepts Punisher body features a low profile design for a lower C.G., improved air flow and quicker fueling.

JConcepts Illuzion wing pre-drilled for RC8T.

JConcepts tires and foam inserts.

Three aluminum clutch shoes with full sets of 1.0mm and 1.1mm clutch springs.

Factory Team 7075 blue aluminum one-piece top plate.

Lightweight 3mm 7075 hard-anodized chassis.

4.30:1 ratio gearboxes with a 14T clutchbell and 54T spur gear.

Heatsink brake discs with "FFC" Free Float Caliper brake system eliminates unwanted brake drag.

Two-piece split-center diff mount allows easy access to the center diff.

3.5mm light CVA drivetrain with full ball bearings.

Rear molded CVA boots to keep dirt and mud out of rear joints.

Lightweight engine mounts.

RC8T Factory Team Championship Edition Kit Specifications:

Scale: 1:8

Power: Nitro

Length: 555mm

Width: 410mm

Wheelbase: 375mm

Track: 346mm

Weight: 4230g*

Internal Gear Ratio: 4.30:1

Drive: 4WD

Penampakanya bos:

Uploaded with ImageShack.us

Uploaded with ImageShack.us

No Tipu2 Di sini!!! Yang saya jual 100% KIT baru, Harga Nett 6jt aja, yang serius berminat bs SMS saya di 085811375808 , Rekber via piggybank , bisa di kirim luar jakarta dengan ongkir di tanggung pembeli.....thx

Terkait:

Menu