|
Networking & Communications Tempat menjual alat untuk jaringan seperti hub, switch, router dan lainnya |
Post Reply |
Tweet | Listing Tools |
#1
|
||||
|
||||
![]()
Kondisi Barang : Baru
Harga : Lokasi Seller : Daerah Istimewa Yogyakarta Description : Dijual 2 unit : 16-port Unmanaged Stackable Dual Speed Hub D-Link's DFE-916DX HUB Eks. Warnet/Rental Komp. Kondisi: 2nd Masih bagus. Harga per-unit = Rp.300.000,- NEGO WAJAR Harga belum termasuk Ongkir, inipun bisa dinego pula. Penawaran Silahkan PM. ![]() ![]() ![]() ![]() 16-port Unmanaged Stackable Dual Speed Hub D-Link's DFE-916DX dual speed stackable hub provides an easy and cost-effective transition to Fast Ethernet. It gives users the 10/100Mbps dual speed flexibility, scalable expansion, and the most competitive price for plug-and-play connection of Ethernet and Fast Ethernet workgroups. Features : Dual Speed Flexibility With Ethernet/Fast Ethernet support at the port level, users can deply 100Mbps when needed, and still run 10Mbps on some desktops on the same network. Easy to Use Each port on the hub supports dual 10/100Mbps speeds. The hub auto-negotiates the speed with the connected nodes and creates independent 10Mbps and 100Mbps segments. No configuration setting is necessary, and Ethernet and Fast Ethernet users can be physically located anywhere on the network. Easy Migration Migration from Ethernet to Fast Ethernet requires no installation of new hubs, no re-connection of hub ports, no change of wiring. As the most cost-effective device for migration to high-bandwidth, the hub protect users' investment by extending their lifespan through transition from 10Mbps to 100Mbps. 10/100Mbps Integration The hub is equipped with built-in 10/100Mbps packet switching capability. With this, connection between 10Mbps and 100Mbps segments of the entire stack is transparent, allowing Ethernet and Fast Ethernet users to talk to each other on the same network. Scalable Expansion Stackable in groups of 5, the hub allows users to gradually add ports as their network expands. Users can start with a single hub, then add units to eventually reach 80-ports per stack, without incrementing the repeater count. An MDI uplink interface allows easy cascading of 2 stacks to bring the port density up to 158. Feature Summary : 16-port Dual Speed 10/100Mbps Auto-Sensing connections Stackable up to 5 units (80-ports) per stack MDI uplink port for easy expansion UTP and STP supported Easy migration to 100Mbps Fast Ethernet networks Built-in 10/100Mbps packet switch for integration of 10Mbps and 100Mbps segments Internal universal power supply Easy-to-view diagnostic LEDs Technical Standards : IEEE 802.3 10Base-T Standard IEEE 802.3u 100Base-TX Standard ANSI/IEEE 802.3 NWay Auto-negotiation 100-ohm Category 3,4,5 (for 10Base-T) and Cat 5 (for 100Base-TX) Unshielded Twisted Pair cable EIA/TIA-568 100-ohm Shielded Twisted Pair cable Protocols : IEEE 802.3 Ethernet CSMA/CD IEEE 802.3u Fast Ethernet CSMA/CD Certification : FCC Class A CE Mark VCCI Class A C-Tick UL 1950 CSA 950 System Feature : Automatic Port Partitioning for each port Internal Universal Power Supply Performance Feature : Maximum of 5 Hubs per Stack 25-pin DB-25 Stacking Port per Hub Operating Environment : Dimensions : 324 x 231 x 44.5 mm Operating Temperature : -10oC to 55oC Storage Temperature : -25oC to 55oC Humidity : 5% to 95% non-condensing Power Consumption : 24.0 watts (max) Terkait:
|
Sponsored Links | |
Space available |
Post Reply |
|