Kondisi Barang : Baru
Harga :
Lokasi Seller : Jawa Barat
Description :
back in stock
[size=12pt]Tekno RC M6 Driveshafts and Steering Blocks will give your Slash 4x4 the ultimate in performance and durability.
[/size]
# Custom 6mm stub axles - no more bending or breaking
# Bigger outer bearing for better load handling 6x12x4 (stock is 5x11x4 outer)
# Hardened steel driveshafts and drive cups
# Captured CV drive pin - it can't fall out.
# New M6 steering block design with additional bump-steer adjustments
# Eliminates slop
# Stock wheels and nuts fit with no mods
# Metric hardware throughout
http://img34.imageshack.us/img34/1320/teknofront.png
http://img845.imageshack.us/img845/7...eshaftsfro.jpg
[size=12pt]Tekno RC M6 Driveshafts and Rear Hubs will give your Slash 4x4 the ultimate in performance and durability.[/size]
# Custom 6mm stub axles - no more bending or breaking
# Bigger bearings for better load handling 10x15x4 inner and a 6x12x4 outer bearing (stock is 5x11x4 inner/outer)
# Hardened steel driveshafts and drive cups
# Captured CV drive pin - it can't fall out.
# New M6 rear hub design with multiple camber link locations
# Includes two sets of rear hubs (0.5 and 1.5 degrees). 1, 2, 3, and 4 degree settings available.
# Reduces slop
# Stock wheels and nuts fit with no mods
# Metric hardware throughout
http://img171.imageshack.us/img171/1...knorear4x4.png
http://img713.imageshack.us/img713/7...6driveshaf.jpg
aluminum upgraded set of 12mm hex adapters for the Tekno RC M6 6mm Driveshaft kits. They fit all 12mm hex SC wheels. They have a 6mm inner bore to fit the M6 Stub Axles and may be used on other 6mm axle applications where applicable.
* Hard anodized CNC machined aluminum construction
* Set screw to avoid losing drive pins
* Ultimate durability
* Lightweight design
* Compatible with our M6 Driveshafts for the Slash 2WD
http://img62.imageshack.us/img62/242...daptors6mm.jpg
[size=12pt]Tekno RC M6 Driveshafts and Rear Hubs will give your Slash 2WD (or Nitro Rustler/Stampede) the ultimate in performance and durability.[/size]
* Custom 6mm stub axles - no more bending or breaking
* No Telescoping = NO BINDING
* Bigger bearings for better load handling 10x15x4 inner and a 6x12x4 outer bearing (stock is 5x11x4 inner/outer)
* Hardened steel driveshafts and drive cups
* Captured CV drive pin - it can't fall out.
* New M6 rear hub design with multiple camber link locations
* Includes two sets of rear hubs (0.5 and 1.5 degrees). 1, 2, 3, and 4 degree settings available.
* Reduces slop
* Stock wheels and nuts fit with no mods
* Metric hardware throughout
http://img692.imageshack.us/img692/8...noslash2wd.png
http://img31.imageshack.us/img31/467...52m6drives.jpg
open links:
http://www.teknorc.com/index.php?cPa...9199d88236e56f
Harga :
Lokasi Seller : Jawa Barat
Description :
back in stock
[size=12pt]Tekno RC M6 Driveshafts and Steering Blocks will give your Slash 4x4 the ultimate in performance and durability.
[/size]
# Custom 6mm stub axles - no more bending or breaking
# Bigger outer bearing for better load handling 6x12x4 (stock is 5x11x4 outer)
# Hardened steel driveshafts and drive cups
# Captured CV drive pin - it can't fall out.
# New M6 steering block design with additional bump-steer adjustments
# Eliminates slop
# Stock wheels and nuts fit with no mods
# Metric hardware throughout
http://img34.imageshack.us/img34/1320/teknofront.png
http://img845.imageshack.us/img845/7...eshaftsfro.jpg
[size=12pt]Tekno RC M6 Driveshafts and Rear Hubs will give your Slash 4x4 the ultimate in performance and durability.[/size]
# Custom 6mm stub axles - no more bending or breaking
# Bigger bearings for better load handling 10x15x4 inner and a 6x12x4 outer bearing (stock is 5x11x4 inner/outer)
# Hardened steel driveshafts and drive cups
# Captured CV drive pin - it can't fall out.
# New M6 rear hub design with multiple camber link locations
# Includes two sets of rear hubs (0.5 and 1.5 degrees). 1, 2, 3, and 4 degree settings available.
# Reduces slop
# Stock wheels and nuts fit with no mods
# Metric hardware throughout
http://img171.imageshack.us/img171/1...knorear4x4.png
http://img713.imageshack.us/img713/7...6driveshaf.jpg
aluminum upgraded set of 12mm hex adapters for the Tekno RC M6 6mm Driveshaft kits. They fit all 12mm hex SC wheels. They have a 6mm inner bore to fit the M6 Stub Axles and may be used on other 6mm axle applications where applicable.
* Hard anodized CNC machined aluminum construction
* Set screw to avoid losing drive pins
* Ultimate durability
* Lightweight design
* Compatible with our M6 Driveshafts for the Slash 2WD
http://img62.imageshack.us/img62/242...daptors6mm.jpg
[size=12pt]Tekno RC M6 Driveshafts and Rear Hubs will give your Slash 2WD (or Nitro Rustler/Stampede) the ultimate in performance and durability.[/size]
* Custom 6mm stub axles - no more bending or breaking
* No Telescoping = NO BINDING
* Bigger bearings for better load handling 10x15x4 inner and a 6x12x4 outer bearing (stock is 5x11x4 inner/outer)
* Hardened steel driveshafts and drive cups
* Captured CV drive pin - it can't fall out.
* New M6 rear hub design with multiple camber link locations
* Includes two sets of rear hubs (0.5 and 1.5 degrees). 1, 2, 3, and 4 degree settings available.
* Reduces slop
* Stock wheels and nuts fit with no mods
* Metric hardware throughout
http://img692.imageshack.us/img692/8...noslash2wd.png
http://img31.imageshack.us/img31/467...52m6drives.jpg
open links:
http://www.teknorc.com/index.php?cPa...9199d88236e56f