|
Post Reply |
Tweet | Thread Tools |
#1
|
||||
|
||||
![]()
Kondisi Barang : Baru
Harga : Lokasi Seller : Jawa Barat Description : back in stock [size=12pt]Tekno RC M6 Driveshafts and Steering Blocks will give your Slash 4x4 the ultimate in performance and durability. [/size] # Custom 6mm stub axles - no more bending or breaking # Bigger outer bearing for better load handling 6x12x4 (stock is 5x11x4 outer) # Hardened steel driveshafts and drive cups # Captured CV drive pin - it can't fall out. # New M6 steering block design with additional bump-steer adjustments # Eliminates slop # Stock wheels and nuts fit with no mods # Metric hardware throughout ![]() ![]() [size=12pt]Tekno RC M6 Driveshafts and Rear Hubs will give your Slash 4x4 the ultimate in performance and durability.[/size] # Custom 6mm stub axles - no more bending or breaking # Bigger bearings for better load handling 10x15x4 inner and a 6x12x4 outer bearing (stock is 5x11x4 inner/outer) # Hardened steel driveshafts and drive cups # Captured CV drive pin - it can't fall out. # New M6 rear hub design with multiple camber link locations # Includes two sets of rear hubs (0.5 and 1.5 degrees). 1, 2, 3, and 4 degree settings available. # Reduces slop # Stock wheels and nuts fit with no mods # Metric hardware throughout ![]() ![]() aluminum upgraded set of 12mm hex adapters for the Tekno RC M6 6mm Driveshaft kits. They fit all 12mm hex SC wheels. They have a 6mm inner bore to fit the M6 Stub Axles and may be used on other 6mm axle applications where applicable. * Hard anodized CNC machined aluminum construction * Set screw to avoid losing drive pins * Ultimate durability * Lightweight design * Compatible with our M6 Driveshafts for the Slash 2WD ![]() [size=12pt]Tekno RC M6 Driveshafts and Rear Hubs will give your Slash 2WD (or Nitro Rustler/Stampede) the ultimate in performance and durability.[/size] * Custom 6mm stub axles - no more bending or breaking * No Telescoping = NO BINDING * Bigger bearings for better load handling 10x15x4 inner and a 6x12x4 outer bearing (stock is 5x11x4 inner/outer) * Hardened steel driveshafts and drive cups * Captured CV drive pin - it can't fall out. * New M6 rear hub design with multiple camber link locations * Includes two sets of rear hubs (0.5 and 1.5 degrees). 1, 2, 3, and 4 degree settings available. * Reduces slop * Stock wheels and nuts fit with no mods * Metric hardware throughout ![]() ![]() open links: http://www.teknorc.com/index.php?cPa...9199d88236e56f Terkait:
|
Sponsored Links | |
Space available |
Post Reply |
|